Free tools

Water cut calculator

Calculate water cut, oil cut, and water-oil ratio from the oil and water volumes produced over the same period.

Oil volume for the period.

Water volume for the same period.

Formulas

  • Water cut (%) = Water volume / (Oil volume + Water volume) × 100
  • Oil cut (%) = 100 - Water cut
  • Water-oil ratio (bbl/bbl) = Water volume / Oil volume

Worked example

Entered

Oil produced
100 bbl
Water produced
25 bbl

Result

Water cut
20 %
Oil cut
80 %
Water-oil ratio
0.25 bbl/bbl

Before you rely on it

  • Both volumes must be in the same unit and cover the same period. The unit cancels out, so barrels, cubic metres, or litres all give the same water cut.
  • This is the produced-volume water cut. It is not a BS&W measurement from a sample.
  • If no liquid was produced, water cut is shown as N/A rather than 0.

These results are preliminary and are not certified engineering calculations. They require review by a qualified engineer and independent verification before being used for operational, commercial, regulatory, or safety-critical decisions.

For the method, a step-by-step example, and the usual mistakes, read Water cut formula for oil and gas wells.

Need the whole well test in one go?

The full calculator takes the test duration and the oil, gas, and water produced, and returns every rate, water cut, and GOR together, with a PDF report.

Open the well-test calculator