In short
A small tool that turns well-test measurements into production rates and a shareable report, without the spreadsheet.
On this page
A lot of well-test reporting still runs on spreadsheets that were copied from someone else's spreadsheet. The arithmetic is simple, but the process is not: units live in column headers, formulas get overwritten, and the report is formatted by hand each time.
WellersDen is a first attempt at making the basic workflow faster and more consistent. It does three things.
1. Takes the test measurements
Enter the well name, test date, test duration, and the oil, gas, and water produced, or import one record from a CSV file. Units are stated on every field: oil in stock-tank barrels, water in barrels, and gas in standard cubic feet at your own reporting conditions.
2. Calculates the basics
Oil, gas, and water rates per day, total liquid rate, water cut, and gas-oil ratio. The formulas are published on the site and repeated next to every result. When a value is not defined, such as GOR with no oil produced, it is shown as N/A instead of a number.
3. Produces a report
WellersDen Pro adds a PDF report with the inputs, results, formulas, and assumptions on it, and an optional AI-written summary paragraph. The summary is checked so that it only repeats figures from the calculated results.
What it does not do
These are time-normalized volume calculations. WellersDen does not perform pressure transient analysis, fluid property correction, meter calibration, or reservoir interpretation, and its results are preliminary until a qualified engineer has reviewed them.
Try it and tell us what is missing
The calculator is free and needs no account. If you run well tests for a living, we would like to know which calculations, units, and report fields would make this useful for you: divv@divvlaunches.com.
