Free tools

Gas-oil ratio (GOR) calculator

Calculate the produced gas-oil ratio in scf/STB from the gas and oil volumes produced over the same period.

Standard cubic feet, at your reporting standard conditions.

Stock-tank barrels for the same period.

Formulas

  • GOR (scf/STB) = Gas volume (scf) / Oil volume (STB)
  • GOR (Mscf/STB) = GOR (scf/STB) / 1,000

Worked example

Entered

Gas produced
50,000 scf
Oil produced
100 STB

Result

Gas-oil ratio
500 scf/STB
Gas-oil ratio
0.5 Mscf/STB

Before you rely on it

  • This is the produced GOR for the period: total gas over total oil. It is not solution GOR (Rs) from a PVT analysis.
  • Enter gas already expressed at your standard conditions. No pressure or temperature correction is applied.
  • If no oil was produced, GOR is shown as N/A instead of dividing by zero.

These results are preliminary and are not certified engineering calculations. They require review by a qualified engineer and independent verification before being used for operational, commercial, regulatory, or safety-critical decisions.

For the method, a step-by-step example, and the usual mistakes, read How to calculate GOR (gas-oil ratio) in oil and gas.

Need the whole well test in one go?

The full calculator takes the test duration and the oil, gas, and water produced, and returns every rate, water cut, and GOR together, with a PDF report.

Open the well-test calculator