Well testing, simplified.
A calculator for oil and gas well tests. Enter how long the test ran and how much oil, gas, and water the well produced. Get the daily rates, water cut, and GOR, and a PDF report to share.
Free. No sign-up.
You enter
- Test duration
- 12 hours
- Oil produced
- 100 STB
- Gas produced
- 50,000 scf
- Water produced
- 25 bbl
You get
- Oil rate
- 200 STB/day
- Gas rate
- 100,000 scf/day
- Water rate
- 50 bbl/day
- Total liquid rate
- 250 bbl/day
- Water cut
- 20 %
- Gas-oil ratio (GOR)
- 500 scf/STB
WellersDen does not perform pressure transient analysis, fluid property correction, meter calibration, or reservoir interpretation. Results are preliminary and need independent verification by a qualified engineer before use in operational decisions.
Pricing
The calculator is free. Pay only if you need reports regularly.
Free
$0
- Oil, gas, and water rates per day
- Total liquid rate, water cut, and GOR
- CSV import
- No account needed to calculate
- 3 AI summaries and 1 PDF report with a free account
Pro
$29 per month, plus tax where it applies
- Everything in Free
- Unlimited PDF reports with inputs, results, formulas, and assumptions
- Unlimited AI summaries, included in the report
Cancel any time. Payments are non-refundable; see the Terms.
How it works
01
Enter measurements
Type the test duration and produced volumes, or import a one-record CSV file.
02
Calculate
Rates, water cut, and GOR are computed in your browser with the formulas below.
03
Download the report
With WellersDen Pro, export a PDF with the inputs, results, formulas, and assumptions.
Formulas
Every result is a time-normalized volume calculation. Nothing is estimated or corrected.
- Oil rate (STB/day)
- = Oil volume (STB) / Test duration (hours) × 24
- Gas rate (scf/day)
- = Gas volume (scf) / Test duration (hours) × 24
- Gas rate (Mscf/day)
- = Gas rate (scf/day) / 1,000
- Water rate (bbl/day)
- = Water volume (bbl) / Test duration (hours) × 24
- Total liquid rate (bbl/day)
- = Oil rate + Water rate
- Water cut (%)
- = Water volume / (Oil volume + Water volume) × 100
- Gas-oil ratio (scf/STB)
- = Gas volume (scf) / Oil volume (STB)
Assumptions
The same assumptions are printed on every PDF report.
- All entered volumes were measured over the same test interval, stated as the test duration.
- Oil volume is entered in stock-tank barrels (STB) and water volume in barrels (bbl).
- Gas volume is entered in standard cubic feet (scf), already expressed at the user's reporting standard conditions. No pressure, temperature, or compressibility correction is applied, and raw meter or reservoir-condition volumes are not converted.
- Rates are time-normalized volumes scaled to a 24-hour day. They represent the average rate over the test interval, not a stabilized-rate determination.
- Total liquid rate adds the oil rate (STB/day) and water rate (bbl/day) directly, with no shrinkage or formation volume factor adjustment.
- 1 Mscf = 1,000 scf.
- Water cut is reported as N/A when no liquid was produced. Gas-oil ratio is reported as N/A when no oil was produced.
- Values are calculated at full precision and rounded to 2 decimal places for display only.
CSV import format
One header row and exactly one data row. All six columns are required, in any order. Write numbers as plain decimals with no thousands separators or units.
well_name,test_date,duration_hours,oil_stb,gas_scf,water_bbl WD-001,2026-01-15,12,100,50000,25
| Column | Contents | Example |
|---|---|---|
| well_name | Well name or identifier, up to 80 characters | WD-001 |
| test_date | Test date as YYYY-MM-DD | 2026-01-15 |
| duration_hours | Test duration in hours, greater than zero | 12 |
| oil_stb | Oil produced, stock-tank barrels (STB) | 100 |
| gas_scf | Gas produced, scf at reporting standard conditions | 50000 |
| water_bbl | Water produced, barrels (bbl) | 25 |